Tall Bondage Cage

IF YOU WANT TO ORDER A TALL CAGE PLEASE EMAIL FOR AVAILABILITY.

Delivery to UK mainland addresses only.

All steel cage with the following dimensions:

Height: 72"/6ft (183cm)

Width: 24"/2ft (61cm)

Length: 24"/2ft (61cm)

The outer framework is created from 20x20mm box section steel and 16x16mm box section is used for the bars; this makes for a very strong cage.

The cage is delivered in 6 pieces and is bolted together with 14 bolts, assembly is very easy and it only takes 10 minutes to construct. The door is not bolted to the main assembly but just drops onto the hinges with a safety bolt to secure it into place. There is a hasp on the door for which a padlock or caribina etc. can be used to fasten the door closed. There is a slot in the door to allow a bit of extra access.

Unlike some others, this cage DOES NOT use 'through bolts'; all the nuts are captive within the framework which means that there are no protruding bolts that you can injure yourself on or damage a floor with. Likewise, there are no plastic endcaps.

IMPORTANT: Although quite stable, it is possible to push this one over. The cage is supplied with mounting points in the base to allow it to be secured to the floor and a mounting point/chain to allow it to be 'safety chained' to a wall. Either or both can be used to help prevent the cage from being pushed over. At least one method of securing the cage must be used.

The cage is lightly sprayed with a hammer finish silver or black paint to provide corrosion protection and aesthetics.

Bolts/washers, a spanner and the 'flat pack' instructions are all supplied, all you need to supply is a padlock or similar, everything else is included.

DELIVERY Cages are made to order, please allow 14 - 21 days for delivery. Please also read our Q & A section below before ordering.

Need a different size? Drop us an email.

1. As this is a hand made item there are tolerances and imperfections and therefore the sizes and finish may vary slightly.